Fluorescent Lamp Ballasts
As defined in the Code of Federal Regulations (CFR), “fluorescent lamp ballast” means a device that is used to start and operate fluorescent lamps by providing a starting voltage and current and limiting the current during normal operation. 10 CFR 430.2 Manufacturers have been required to comply with the U.S. Department of Energy (DOE) energy conservation standards for fluorescent lamp ballasts since 1990.
Current Standard | Current Test Procedure |
Ongoing Rulemaking for Standards | Ongoing Rulemaking for Test Procedure |
Helpful Links
Recent and Ongoing Activities
Standards
| Request for Information |
|
| Final Determination |
- Federal Register, 85FR81558 (December 16, 2020)
|
| Notice of Proposed Determination |
- Federal Register, 84FR56540 (October 22, 2019)
|
DOE is currently undertaking a rulemaking to consider new energy conservation standards for florescent lamp ballasts.
The fluorescent lamp ballast energy conservation standard rulemaking docket EERE-2015-BT-STD-0006 contains all notices, public comments, public meeting transcripts, and supporting documents pertaining to this rulemaking.
Public Meeting Information:
There is no public meeting scheduled at this time.
Submitting Public Comments
Test Procedure
| Final Rule |
- Federal Register, 85FR56475 (September 14, 2020)
|
| Notice or Proposed Rule |
- Federal Register, 84FR9910 (March 18, 2019)
|
The fluorescent lamp ballast test procedure rulemaking docket EERE-2017-BT-TP-0005 contains all notices, public comments, public meeting transcripts, and supporting documents pertaining to this rulemaking.
Public Meeting Information
There is no public meeting scheduled at this time.
Submitting Public Comments
Current Standard
Fluorescent lamp ballasts manufactured and distributed in commerce, as defined by 42 U.S.C. 6291(16), must meet the energy conservation standards specified in the Code of Federal Regulations at 10 CFR 430.32(m).
To determine that fluorescent lamp ballasts that are currently manufactured or distributed into commerce are in compliance with DOE standards, manufacturers must follow the test procedure methods specified at 10 CFR 430, Subpart B, Appendix Q.
Helpful Links
Compliance
DOE has established regulations on certification, compliance, and enforcement in the CFR at 10 CFR Part 429. These regulations cover statistical sampling plans, certified ratings, certification reports, record retention, and enforcement. More information on these regulations is available here.
Waivers
For information on current test procedure waivers, see DOE’s Waivers webpage.
For information about obtaining test procedure waivers, see 10 CFR 430.27.
Exceptions
DOE's Office of Hearings and Appeals has not authorized exception relief for fluorescent lamp ballasts.
For information about obtaining exception relief, see 10 CFR part 1003.
Guidance and Frequently Asked Questions
For information on further guidance and answers to Frequently Asked Questions on all covered products, see DOE’s Further Guidance database.
State Exemptions to Federal Pre-emption
DOE has not exempted any state from this energy conservation standard. States may petition DOE to exempt a state regulation from preemption by the Federal energy conservation standard. States may also petition DOE to withdraw such exemptions. For details, see 10 CFR part 430, subpart D.
Small Business Exemptions
Any manufacturer of a covered product with annual gross revenues that do not exceed $8,000,000 from all its operations and meets certain other conditions may apply for an exemption to the energy conservation standard. For details, see 10 CFR part 430, subpart E.
ENERGY STAR®
Find tips and guidance for making your home, workplace, or vehicle more energy efficient visit EnergySavers.gov.
DOE supports the testing and verification of ENERGY STAR® products in close collaboration with the Environmental Protection Agency.
For more information related to this product, please email:
ApplianceStandardsQuestions@ee.doe.gov
