Snow and ice plan

Learn about how we prepare and prioritize our response to winter weather driving conditions.

Our crews start working long before snowflakes fall to keep roads open during inclement weather. We use advanced weather forecasting to predict where snow and ice will accumulate and use the information to pre-treat high traffic corridors. The anti-icing chemicals we apply help prevent frost and ice from bonding to the pavement. Once snow has started falling and accumulating, we switch to a salt pre-wet with a corrosion-inhibited liquid deicer that helps snow and ice to melt, making it easier to remove with snowplows – but it takes time to work.

Plowing

A lot of ground to cover

Our winter snow and ice response is a balancing act between the forces of nature, available crews and keeping equipment running.

  • Statewide we have approximately 500 plow and dump trucks.
  • Our trucks need to cover more than 20,000 lanes miles.
  • To efficiently treat roadway surfaces for snow and ice our trucks travel about 25-35 miles per hour.

While we work 24/7 during winter storms, we can’t be everywhere at once. During heavy storms, for example, a road may need several passes with a plow to completely clear snow and ice. This means roads are prioritized when it comes to plowing.

Priority plow routes

To strategically deploy our resources, equipment and supplies during inclement weather, priority plow levels are assigned to all of the highways we maintain. The determination is based on the following factors:

  • The number of vehicles that use the highway each day
  • Steep hills, sharp curves, intersections or ramps
  • Access to emergency services, schools, businesses and freight routes

Knowing the plowing priorities along your route can help you plan your trips, including knowing to expect winter conditions on certain roads or possibly delaying travel during particularly heavy storms.

Priority plow route maps

Our priority plow route maps (PDF 1.9MB)  show which roads are prioritized for treatment during severe storms and can help travelers plan routes or make decisions on traveling.

What do the plow map colors mean?

Purple

Our highest-priority routes as our primary focus is to keep interstate corridors open. Interstate 5 is the busiest roadway on the west coast and is vital for moving people and goods to support the economy. From the onset of an event, our goal is to keep at least a single lane open in each direction and work towards bare and wet pavement across all lanes.

Blue

These are important intercity and local routes, which carry between 20,000 and 80,000 vehicles per day. These stretches of highway include many of the east/west routes like sections of US 2, US 12 and SR 14.

Green

These routes generally carry fewer than 20,000 vehicles a day. The priority levels of some of the green highways change, as the number of people using the highway and geography changes, like US 101 near Discovery Bay.

Orange

Winter climates differ greatly on either side of the Cascades. You'll likely notice more orange routes in Eastern Washington, like SR 21. That's because snowfall and freezing temps often occur throughout the winter on the east side of the Cascades. Our priority is to keep traffic moving under normal expected winter conditions for the 5,000 to 10,000 vehicles that use these roadways daily.

Red

Less than 5,000 vehicles use these routes per day. Some of these roads, like the upper reaches of SR 504 on Mount St. Helens, are often closed during the winter months.

Black

We partner with agencies around the state to manage sections of highways which pass through many cities and counties.

Road treatment

We use plowing and a variety of products to pre-treat and clear roadways – balancing the materials and amounts used as conditions change.

Anti-icing

Liquid calcium chloride, sodium chloride or magnesium chloride is applied to a bare road before a storm to:

  • prevent ice from forming on a bare road.
  • reduce the amount of snow buildup.
  • accelerate the snow and ice break up after a storm.

De-icing

Solid sodium chloride (salt) is applied to remove a thin layer of snow or ice already on the road. It can also be very effective for melting and preventing black ice and freezing rain from adhering to the road

Pre-wetting

Wetting solid chemical material and sand with calcium or magnesium chloride causes them to stick to the road surface better, helps activate the solid salt and reduces corrosion.

Keeping solids on the road is difficult in some circumstances, especially with high-speed traffic. In these instances, pre-wet can help keep the sand from blowing off the road, saving on material use and ensuring that the product is in the proper location.

Sand

While not used as much as years past, sand is still used in road treatment, particularly in colder weather. Sand can blow off roadways fairly, quickly, however and can cause cleanup and water quality concerns if it enters nearby waterways.

Corrosion inhibitors

We add corrosion inhibitors – products to help prevent corrosion – to our treatment products to reduce corrosion on vehicles traveling over the roadways. Motorists concerned about salt or chemicals on their vehicles may also want to wash the vehicles to remove any material.

Environmental factors

Salt, chemicals and sand all have potential environmental concerns, which is why we train operators to apply only as much as necessary. Our precision equipment is also calibrated regularly to ensure we're applying treatments in carefully measured doses. We also annually monitor more than 50 sites for chloride levels in soil and water near our roadways.

We need your help

Things you can do to help improve driving conditions, include:

  • Clear snow and ice from all windows – and the roof of your vehicle – before you drive
  • Allow extra time to reach your destination
  • Check road conditions before traveling either online or on the mobile app
  • Be aware of changing weather conditions
  • Ensure your vehicle is in good working order and has appropriate tires for winter travel
  • Pack chains and other winter driving supplies in your vehicle
  • If you do decide to travel during a snow and ice event, drive for the conditions and to your capabilities

Remember to:

  • Slow down.
  • Give road crews plenty of room to work.
  • Don't pass a plow, operators have limited visibility of other vehicles and may be throwing snow from either direction.
  • Leave extra space between you and the vehicle in front of you.
  • Give yourself extra room to stop.

Our priority plow route maps (PDF 1.9MB) show which roads are prioritized for treatment during severe storms and can help travelers plan routes or make decisions on traveling.

Slow down on ice and snow.

It's easier to skid or lose control traveling at higher speeds. Give yourself more time to stop.

Carry chains, practice installing them.

Winter conditions could mean chains are required on your route. Practice putting them on your vehicle ahead of time.

Pack your winter car kit.

Carry extra supplies like warm clothing, ice scraper and brush, jumper cables and other emergency items.