Skip to main content
U.S. flag

An official website of the United States government

October 1, 2018

One of the most common questions asked of YVO is "when is the next big one?" This is an interesting question, given the multiple potential natural hazards that exist at Yellowstone. Big earthquake? Big lava flow? Big explosion?

Most people mean the big explosion, but that's not a particularly likely event. In fact, most people do not know about the potential hazard associated with a hydrothermal (hot water) explosion, which is far more common than any eruption of lava or volcanic ash.

Hydrothermal explosions are violent and dramatic events resulting in the rapid ejection of boiling water, steam, mud, and rock fragments. The explosions can reach heights of 2 km (1.2 miles) and leave craters that are from a few meters (tens of feet) up to more than 2 km (1.2 mi) in diameter. Ejected material, mostly breccia (angular rocks cemented by clay), can be found far as 3 to 4 km (1.8 to 2.5 mi) from the largest craters.

Hydrothermal explosion at Biscuit Basin in Yellowstone National Par...
Hydrothermal explosion at Biscuit Basin in Yellowstone National Park. These types of events are the most likely explosive hazard from the Yellowstone Volcano.

Hydrothermal explosions occur where shallow interconnected reservoirs of fluids with temperatures at or near the boiling point underlie thermal fields. These fluids can rapidly transition to steam if the pressure suddenly drops. Since vapor molecules take up much more space than liquid molecules, the transition to steam results in significant expansion and blows apart surrounding rocks and ejects debris. Hydrothermal explosions are a potentially significant local hazard and can damage or even destroy thermal features. In Yellowstone, hydrothermal explosions occur within the Yellowstone Caldera and along the active Norris-Mammoth tectonic corridor.

Large hydrothermal explosions occur on average every 700 years, and at least 25 explosion craters greater than 100 m (328 ft) wide have been identified. The scale of these craters dwarfs similar features in geothermal areas elsewhere in the world. Large hydrothermal explosions in Yellowstone occurred after an icecap greater than 1 km (0.6 mi) thick receded from the Yellowstone Plateau around 14,000-16,000 years ago.

Studies of large hydrothermal explosion events in Yellowstone indicate: (1) none are directly associated with magma; (2) several smaller historic explosions have been triggered by seismic events, like the 1959 Hebgen Lake earthquake; (3) rocks ejected by hydrothermal explosions show significant mineral alteration, indicating that explosions occur in areas subjected to intense hydrothermal processes; and (4) many large hydrothermal explosion craters in Yellowstone are similar in area to active geyser basins and thermal areas.

Critical components for development of large hydrothermal systems require high heat flow, abundant water (Yellowstone Plateau receives about 180 cm (70 in) of precipitation annually), and seismicity (Yellowstone experiences 1000-3000 earthquakes/year) to maintain open fractures. Active deformation of the Yellowstone Caldera and seasonal changes also contribute.

This is an aerial photo of Indian Pond hydrothermal explosion crater
Aerial photo of the 0.06 square mile (0.16 square kilometer) Indian Pond hydrothermal explosion crater north of Yellowstone Lake. The deposits from the explosion that formed the crater were dated with radiocarbon to 2,900 years ago. Photo from Yellowstone National Park Photo Collection taken by Jim Peaco in July 2001.

Hydrothermal systems with explosive potential have a water-saturated system at or near boiling temperatures and an interconnected system of well-developed joints and fractures along which hydrothermal fluids flow. Ascending hydrothermal fluids flow along fractures that have developed due to repeated inflation and deflation of the caldera, which causes rocks to break, and along edges of low-permeability rhyolitic lava flows. The size and location of hydrothermal fields may be limited by excessive alteration of rocks and development of clay minerals that can create caprocks and seal the system. If a portion of the system is sealed, any sudden or abrupt drop in pressure causes water to flash to steam, which is rapidly transmitted through interconnected fractures. The result is a series of multiple explosions and the excavation of a crater. Similarities between the size and dimensions of large hydrothermal explosion craters and thermal fields in Yellowstone indicate that this type of event may be an end stage in geyser basin evolution.

Although large hydrothermal explosions are rare events on a human time scale, the potential for additional future events of the sort in Yellowstone National Park is not insignificant. Based on the occurrence of large hydrothermal explosion events over the past 16,000 years, an explosion large enough to create a 100-m- (328-ft-) wide crater might be expected every few hundred years.

Get Our News

These items are in the RSS feed format (Really Simple Syndication) based on categories such as topics, locations, and more. You can install and RSS reader browser extension, software, or use a third-party service to receive immediate news updates depending on the feed that you have added. If you click the feed links below, they may look strange because they are simply XML code. An RSS reader can easily read this code and push out a notification to you when something new is posted to our site.