[Federal Register Volume 85, Number 92 (Tuesday, May 12, 2020)] [Notices] [Pages 27998-28003] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2020-10101] ======================================================================= ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2020-0077; FRL-10008-64] Certain New Chemicals; Receipt and Status Information for March 2020 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly available and to publish information in the Federal Register pertaining to submissions under TSCA Section 5, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application (Biotech exemption); an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from 03/01/ 2020 to 03/31/2020. DATES: Comments identified by the specific case number provided in this document must be received on or before June 11, 2020. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the chemical substance related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting [[Page 27999]] or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. Executive Summary A. What action is the Agency taking? This document provides the receipt and status reports for the period from 03/01/2020 to 03/31/2020. The Agency is providing notice of receipt of PMNs, SNUNs and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis. B. What is the Agency's authority for taking this action? Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et seq., a chemical substance may be either an ``existing'' chemical substance or a ``new'' chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a ``new chemical substance,'' while a chemical substance that is listed on the TSCA Inventory is classified as an ``existing chemical substance.'' (See TSCA section 3(11).) For more information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory. Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3). TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for ``test marketing'' purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the Federal Register certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review. C. Does this action apply to me? This action provides information that is directed to the public in general. D. Does this action have any incremental economic impacts or paperwork burdens? No. E. What should I consider as I prepare my comments for EPA? 1. Submitting confidential business information (CBI). Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. Status Reports In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending or concluded. In 1995, the Agency modified its approach and streamlined the information published in the Federal Register after providing notice of such changes to the public and an opportunity to comment (See the Federal Register of May 12, 1995 (60 FR 25798) (FRL-4942-7)). Since the passage of the Lautenberg amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis. III. Receipt Reports For the PMN/SNUN/MCANs that have passed an initial screening by EPA during this period, Table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices screened by EPA during this period: The EPA case number assigned to the notice that indicates whether the submission is an [[Page 28000]] initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer (i.e., domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity. As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number. Submissions which are amendments to previous submissions will have a case number followed by the letter ``A'' (e.g. P-18-1234A). The version column designates submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables. Table I--PMN/SNUN/MCANs Approved * From 03/01/2020 to 03/31/2020 -------------------------------------------------------------------------------------------------------------------------------------------------------- Received Case no. Version date Manufacturer Use Chemical substance -------------------------------------------------------------------------------------------------------------------------------------------------------- P-17-0110A.................. 4 03/12/2020 DIC International (USA) (G) Masking Photopolymer........... (G) Phenol formaldehyde glycidyl LLC. ether acrylate cycloalkene ester. P-17-0233A.................. 4 03/09/2020 CBI...................... (S) Creping Aid for Yankee Dryers (G) Oxyalkylene modified polyalkyl to manufacture tissue and towel amine alkyl diacid polymer with 2- paper. (chloromethyl)oxirane. P-17-0414A.................. 6 03/05/2020 CBI...................... (G) Monitor well performance....... (G) Halogenated benzoic acid. P-18-0059A.................. 2 03/10/2020 Eastman Chemical Company, (S) Chemical intermediate.......... (S) Butanoic acid, 4- Inc. (dimethylamino)-, ethyl ester. P-18-0060A.................. 5 03/10/2020 Eastman Chemical Company, (S) Surfactant for Liquid Dish, (S) 1-Butanaminium, 4-amino-N-(2- Inc. Liquid Laundry, and Industrial hydroxy-3-sulfopropyl)-N, N- Hand Wash; Export only volume of dimethyl-4-oxo-, N-coco alkyl the TSCA manufactured NCS; and FDA derivs., inner salts. related uses. P-18-0069A.................. 3 03/09/2020 Sasol Chemicals (USA) LLC (G) Polymer performance additive... (G) Surface modified boehmite. P-18-0143A.................. 7 03/03/2020 Huntsman International (G) Anti-corrosive primer for (G) Fatty acids, tall-oil polymers LLC. outdoor industrial applications. with aminoalkyl, dialkyl alkane diamine, polyalkylene polyamine alkanepolyamine fraction, and tris-[(alkylamino) alkyl] phenol. P-18-0144A.................. 6 03/03/2020 CBI...................... (G) Anti-corrosive primer for (G)Formaldehyde, polymer with an outdoor industrial applications. alkane diamine and phenol. P-18-0152A.................. 6 03/06/2020 CBI...................... (G) Intermediate for use in (G) Hydrolyzed Functionalized Di- manufacturing. amino Silanol Polymer. P-18-0152A.................. 7 03/06/2020 CBI...................... (G) Intermediate for use in (G) Hydrolyzed Functionalized Di- manufacturing. amino Silanol Polymer. P-18-0152A.................. 8 03/11/2020 CBI...................... (G) Intermediate for use in (G) Hydrolyzed Functionalized Di- manufacturing. amino Silanol Polymer. P-18-0237A.................. 9 02/28/2020 CBI...................... (G) Use in print resins............ (G) Alkanediol, polymer with 5- isocyanato-1-(isocyanatomethyl)- 1,3,3-trimethylcyclohexane, alkylaminoalkyl methacrylate-, and dialkylheteromonocycle- blocked. P-18-0292A.................. 6 02/28/2020 CBI...................... (G) Use in print resins............ (G) alkanediol, polymer with 5- isocyanato-1-(isocyanatomethyl)- 1,3,3-trimethylcyclohexane, alkylaminoalkylmethacrylate- blocked. P-18-0323A.................. 7 03/02/2020 Kuraray America, Inc..... (G) Raw material for polymer (S) 2-Propenoic acid, 2-methyl-, 3- manufacturing. methyl-3-buten-1-yl ester. P-18-0326A.................. 7 03/04/2020 CBI...................... (G) Chemical Intermediate.......... (G) Alkanoic acid, alkyl ester, manuf. of, byproducts from, distn. residues. P-18-0330A.................. 2 03/04/2020 CBI...................... (G) Initiator...................... (G) Formaldehyde, polymer with alkyl aryl ketone. P-18-0376A.................. 4 03/11/2020 Sumitomo Chemical (S) Substance used to improve (G) Thiosulfuric acid, aminoalkyl Advanced Technologies physical properties in rubber ester. LLC. products. P-18-0405A.................. 4 03/05/2020 CBI...................... (G) Adhesive....................... (S) Phenol, 4,4'-(1- methylethylidene)bis-, polymer with 3,6,9,12-tetraoxatetradeca- 1,13-diene, glycidyl ether. P-19-0036A.................. 3 03/11/2020 Ethox Chemicals, LLC..... (S) As an additive to polymers for (S) 1,4-Benzenedicarboxylic acid, improvement in gas barrier 1,4-bis(2-phenoxyethyl) ester. performance. [[Page 28001]] P-19-0036A.................. 4 03/16/2020 Ethox Chemicals, LLC..... (S) As an additive to polymers for (S)1,4-Benzenedicarboxylic acid, improvement in gas barrier 1,4-bis(2-phenoxyethyl) ester. performance. P-19-0077A.................. 11 03/13/2020 CBI...................... (G) Agricultural................... (G) Alkenylamide. P-19-0116................... 4 03/24/2020 CBI...................... (S) Silk protein for production of (G)Sr-(WaspSpider Polypeptide-1 fiber, and Skincare use as Oligopeptide-178). additive in dermal moisturizing lotions. P-19-0138A.................. 3 03/13/2020 CBI...................... (G) Intermediate................... (G) Perfluorodioxaalkanoyl fluoride. P-19-0139A.................. 2 03/13/2020 CBI...................... (G) Intermediate................... (G) Perfluoro-2-methyl- trioxaalkanoyl fluoride. P-19-0140A.................. 3 03/13/2020 CBI...................... (G) Intermediate................... (G)Perfluorodioxaalkyl vinyl ether. P-19-0160A.................. 2 03/04/2020 CBI...................... (S) Component of a UV curable (G) Alkanesulfonic acid, 2-[(2- printing ink. aminoethyl)heteroatom- substituted]-, sodium salt (1:1), polymer with alpha-[2,2- bis(hydroxymethyl)butyl]-omega- methoxypoly(oxy-1,2-ethanediyl) and 1,1'-methylenebis[4- isocyanatocyclohexane], acrylic acid-dipenthaerythritol reaction products- and polypropylene glycol ether with pentaerythritol (4:1) triacrylate-blocked. P-19-0161A.................. 2 03/12/2020 CBI...................... (S) Organic amine salt mixture used (G) Alkano1 amine salt mixture. as a foaming agent in the production of urethanes. P-19-0174A.................. 4 03/11/2020 International Lubricants, (G) Phosphorus antiwear compound... (G) Octadecanoic acid, Inc. (alkylphosphinyl), polyol ester. P-20-0005A.................. 4 03/05/2020 RMC Advanced (G) Additive for plastics and (G) modified graphene. Technologies, Inc. resins. P-20-0010A.................. 5 03/10/2020 CBI...................... (G) Polymerization auxiliary....... (G) Carboxylic acid, reaction products with metalhydroxide, inorganic dioxide and metal. P-20-0011A.................. 5 03/04/2020 CBI...................... (G) Light stabilizer............... (G) Tetraoxaspiro[5.5]alkyl-3,9- diylbis(alkyl-2,1-diyl) bis(2- cyano-3-(3,4- dimethoxyphenyl)acrylate). P-20-0022A.................. 3 03/05/2020 CBI...................... (G) Fuel additive for combustion (G) Polyalkoxycarbopolycycle improver. hydroxy. P-20-0030A.................. 2 03/13/2020 CBI...................... (S) Plasticizer for plastisols and (G) Hexanedioic acid, alkyl ester. in caulks and sealants. P-20-0051A.................. 3 03/11/2020 CBI...................... (S) Curing agent for Industrial (S) 1,8-Octanediamine, 4- epoxy coating systems. (aminomethyl)-, N-benzyl derivs. P-20-0061................... 1 03/03/2020 Allnex USA, Inc.......... (S) Coating resin crosslinking (G) Formaldehyde, polymer with agent. alkylphenols, alkyl ether. P-20-0062................... 1 03/05/2020 Inabata America (S) Use as an electrically (S) Multi-walled carbon nanotubes; Corporation. conductive material, as an closed; 4.4-12.8 nm diameter; additive in field emission bundle length 10.6-211.1 um; applications, as an additive in Grade: Jenotube 6 (Substance-1). batteries, energy storage, and electrode applications, as an additive to improve physical or mechanical properties, as an additive for weight reduction, and as a heat generation material. P-20-0063................... 1 03/05/2020 Inabata America (S) Use as an electrically (S) Multi-walled carbon nanotubes; Corporation. conductive material, as an closed; 5.1-11.6 nm diameter; additive in field emission bundle length 1.9-552.0 um; applications as an additive in Grade: Jenotube 8 (Substance-2). batteries, energy storage, and electrode applications, as an additive to improve physical or mechanical properties, as an additive for weight reduction, as a heat generation material, and as a heat dissipation material. [[Page 28002]] P-20-0064................... 1 03/05/2020 Inabata America (S) Use as an electrically (S) Multi-walled carbon nanotubes; Corporation. conductive material, as an closed; 7.9-14.2 nm diameter; additive in field emission bundle length 9.4-106.4 um; applications, as an additive in Grade: Jenotube 10 (Substance-3). batteries, energy storage, and electrode applications, as an additive to improve physical or mechanical properties, as an additive for weight reduction, as a heat generation material, and as a heat dissipation material. P-20-0065................... 1 03/05/2020 Inabata America (S) Use as an electrically (S) Multi-walled carbon nanotubes; Corporation. conductive material, as an closed; 17.0-34.7 nm diameters; additive in field emission globular shape; Grade: Jenotube applications, as an additive in 20 (Substance-4). batteries, energy storage, and electrode applications, as an additive to improve physical or mechanical properties, as an additive for weight reduction, as a heat generation material, and as a heat dissipation material. P-20-0066................... 1 03/09/2020 CBI...................... (G) Antiwear additive for (G) 2-Propenoic acid, 2- lubricants. hydroxyethyl ester, reaction products with dialkyl hydrogen heterosubstituted phosphate and dimethyl phosphonate. P-20-0067................... 1 03/11/2020 Shepherd Chemical........ (G) Catalyst and Additive.......... (S) Neodecanoic acid, zinc salt, basic. P-20-0068................... 1 03/11/2020 CBI...................... (G) Perfume........................ (S) 1,3-Propanediol, 2,2-dimethyl- , 1,3-diacetate. P-20-0069................... 2 03/21/2020 CBI...................... (G) Surface-active chemical........ (G) 2-Propenoic acid, 2-methyl-, polymer with 2-hydroxyethyl 2- methyl-2-propenoate phosphate and 2-propenoic acid salt, peroxydisulfuric acid ([(HO)S(O)2]2O2) sodium salt (1:2)- and sodium (disulfite) (2:1)-initiated. P-20-0070................... 1 03/16/2020 Clariant Corporation..... (S) Solvent for use in formulated (S) Nonanamide, N,N-dimethyl-. pesticide products, and in agrochemical adjuvant formulations. P-20-0072................... 1 03/18/2020 CBI...................... (G) Additive used to impart (G) Multi-walled carbon nanotubes. specific physicochemical properties to finished articles. P-20-0074................... 1 03/23/2020 Clariant Corporation..... (S) Surfactant for use in the (S) Oxirane, 2-methyl-, polymer formulation of pesticide products. with oxirane, monoundecyl ether, branched and linear. P-20-0075................... 1 03/24/2020 CBI...................... (G) Pigment dispersant............. (G) Phenol, 4,4'-(1- alkylalkylidene)bis-, polymer with 2-(2-aminoalkoxy)alcohol,2- (chloroalkyl)oxirane, N1,N1- dialkyl-1,3-alkanediamine and .alpha-hydro-.omega.-hydroxypoly[ oxy(alkyl-1,2-alkanediyl)], branched 4-alkylphenyl ethers,acetates (salts). P-20-0076................... 1 03/25/2020 Cytec Industries, Inc.... (G) Mining chemical................ (S) Glycine, reaction products with sodium O-iso-Pr carbonodithioate,sodium salts. SN-19-0006A................. 3 03/05/2020 CBI...................... (G) Component for 3D Printing (S) 2-Propen-1-one, 1-(4- formulations. morpholinyl)-. -------------------------------------------------------------------------------------------------------------------------------------------------------- * The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review. In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs that have passed an initial screening by EPA during this period: The EPA case number assigned [[Page 28003]] to the NOC including whether the submission was an initial or amended submission, the date the NOC was received by EPA, the date of commencement provided by the submitter in the NOC, a notation of the type of amendment (e.g., amendment to generic name, specific name, technical contact information, etc.) and chemical substance identity. Table II--NOCs Approved * From 03/01/2020 to 03/31/2020 ---------------------------------------------------------------------------------------------------------------- Commencement If amendment, type Case No. Received date date of amendment Chemical substance ---------------------------------------------------------------------------------------------------------------- P-13-0123............. 03/20/2020 03/16/2020 N.................. (G) Salt of acidic polymers with monomeric and polymeric bases. P-15-0054A............ 03/03/2020 09/30/2015 Withdrew CBI claim. (S) Carbon nanotubes (70% single walled and 30% multi-walled (double- or triple-walled) carbon nanotubes. P-17-0184............. 03/06/2020 02/11/2020 N.................. (S) 1-Propanaminium, 2-hydroxy- N,N-dimethyl-N-[3-[(1- oxooctyl)amino]propyl]-3-sulfo-, inner salt. P-17-0325............. 03/05/2020 03/05/2020 N.................. (S) 2-Propenoic Acid, polymer with 2-methyl-2-((1-oxo- 2propenyl)amino)-1- propanesulfonic acid. P-17-0414A............ 03/09/2020 12/31/2019 Withdrew CBI claim. (S) Benzoic acid, 2,3,5 - trilfuoro. P-17-0450A............ 03/09/2020 12/31/2019 Withdrew CBI claim. (S) Benzoic acid, 2,3,4-trichloro- . P-18-0016............. 03/13/2020 02/24/2020 N.................. (G) Aromatic sulfonium tricyclo fluoroalkyl sulfonic acid salt. P-18-0172............. 03/04/2020 11/06/2019 Withdrew CBI claim. (S) Calcium, carbonate 2- ethylhexanoate neodecanoate propionate complex. P-19-0059............. 03/02/2020 02/06/2020 N.................. (S) Butanoic acid, 3-oxo-, 2-[(2- methyl-1-oxo-1-propen-1- yl)oxy]ethyl ester, polymer with butyl 2-propenoate, ethenylbenzene, 1,1'-[(1-methyl- 1,2-ethanediyl)bis[oxy(methyl- 2,1-ethanediyl)]] di-2- propenoate, methyl 2-methyl-2- propenoate and 2-methyl-2- propenoic acid, ammonium salt. P-19-0099............. 03/02/2020 02/26/2020 N.................. (S) Propanoic acid, 3-hydroxy-2- (hydroxymethyl)-2-methyl-, polymer with dimethyl carbonate, 1,2-ethanediamine, 2- ethyl-2- (hydroxymethyl)-1,3-propanediol, 1,6-hexanediol and 1,1'- methylenebis[4- isocyanatocyclohexane], compd. with n,n-diethylethanamine. ---------------------------------------------------------------------------------------------------------------- * The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission. In Table III of this unit, EPA provides the following information (to the extent such information is not subject to a CBI claim) on the test information that has been received during this time period: The EPA case number assigned to the test information; the date the test information was received by EPA, the type of test information submitted, and chemical substance identity. Table III--Test Information Received From 03/01/2020 to 03/31/2020 ---------------------------------------------------------------------------------------------------------------- Case No. Received date Type of test information Chemical substance ---------------------------------------------------------------------------------------------------------------- P-14-0627..................... 03/11/2020 Oral (Gavage) Prenatal (G) Cyclic amide. Developmental Toxicity Study of n-Butyl Pyrrolidone in New Zealand White Rabbits (OECD Test Guideline 414). P-14-0627..................... 03/04/2020 Draft: Oral (Gavage) Prenatal (G) Cyclic amide. Developmental Toxicity Study of n-Butyl Pyrrolidone in New Zealand White Rabbits (OECD Test Guideline 414). P-16-0404..................... 03/09/2020 Acute Toxicity to the Zebra (G) Alkyl ester, 2-({4-[2- Fish, Determined Under Static- (trisubstituted phenyl)azo]-5- Renewal Test Conditions (OCSPP acetamido-2- Test Guideline 850.1075). substitutedphenyl{time} (substituted alkoxy)amino). P-16-0543..................... 02/28/2020 Exposure Monitoring Report..... (G) Halogenophosphoric acid metal salt. P-18-0303..................... 03/11/2020 Revised Aquatic Toxicity Acute (G) 2-propenoic acid, polymer Base set (OECD Test Guideline with aliphatic cyclic epoxide. 201, 202, 203). ---------------------------------------------------------------------------------------------------------------- If you are interested in information that is not included in these tables, you may contact EPA's technical information contact or general information contact as described under FOR FURTHER INFORMATION CONTACT to access additional non-CBI information that may be available. Authority: 15 U.S.C. 2601 et seq. Dated: April 21, 2020. Pamela Myrick, Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2020-10101 Filed 5-11-20; 8:45 am] BILLING CODE 6560-50-P