[Federal Register Volume 85, Number 47 (Tuesday, March 10, 2020)]
[Notices]
[Pages 13891-13900]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-04891]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2020-0077; FRL-10005-73]
Certain New Chemicals; Receipt and Status Information for January
2020
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to make information publicly available and to publish information in
the Federal Register pertaining to submissions under TSCA, including
notice of receipt of a Premanufacture notice (PMN), Significant New Use
Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including
an amended notice or test information; an exemption application
(Biotech exemption); an application for a test marketing exemption
(TME), both pending and/or concluded; a notice of commencement (NOC) of
manufacture (including import) for new chemical substances; and a
periodic status report on new chemical substances that are currently
under EPA review or have recently concluded review. This document
covers the period from 01/01/2020 to 01/31/2020.
DATES: Comments identified by the specific case number provided in this
document must be received on or before April 9, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at http://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at http://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Information Management Division (7407M), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
[[Page 13892]]
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 01/01/2020 to 01/31/2020. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g. P-18-1234A). The version column designates
[[Page 13893]]
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier versions were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 01/01/2020 to 01/31/2020
--------------------------------------------------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance.
--------------------------------------------------------------------------------------------------------------------------------------------------------
J-19-0026A........................ 4 01/14/2020 CBI.................. (G) Production of (G) Biofuel-producing modified
biofuel. microorganism(s), with chromosomally-borne
modifications.
J-19-0027A........................ 4 01/14/2020 CBI.................. (G) Production of (G) Biofuel-producing modified
biofuel. microorganism(s), with chromosomally-borne
modifications.
P-16-0425A........................ 4 01/31/2020 CBI.................. (G) a chemical (G) amino-silane.
reactant used in
manufacturing a
polymer.
P-17-0117A........................ 4 01/29/2020 CBI.................. (G) Use as a polyol (S) 1,6,10-Dodecatriene, 7,11-dimethyl-3-
for polyurethane methylene-, (6E)-, homopolymer, 2-
manufacture. hydroxypropyl-terminated.
Reaction of the new
substance with a
diisocyanate or
polyisocyanate in a
blend with other
polyols will
produce a higher MW
polymer. (S) Used
as a feedstock for
hydrogenation to
produce a saturated
diol for use in
urethane chemistry
or as an additive
in coatings,
adhesives or
sealants.
P-17-0118A........................ 4 01/29/2020 CBI.................. (G) Use as a polyol (S) 1,6,10-Dodecatriene, 7,11-dimethyl-3-
for polyurethane methylene-, (6E)-, homopolymer, 2-
manufacture. hydroxyethyl-terminated.
Reaction of the new
substance with a
diisocyanate or
polyisocyanate and
other polyols will
produce a higher MW
polymer. (S) Used
as a feedstock for
hydrogenation to
produce a saturated
diol for use in
urethane chemistry
or as an additive
in coatings,
adhesives or
sealants.
P-17-0230A........................ 4 01/21/2020 CBI.................. (G) Additive, open, (G) Oxirane, 2-alkyl-, polymer with oxirane,
non-dispersive use. mono[N-[3-(carboxyamino)-4(or 6)-
alkylphenyl]carbamate], alkyl ether, ester
with 2,2',2''-nitrilotris-[alkanol].
P-17-0235A........................ 6 12/19/2019 CBI.................. (G) Anti-agglomerate (G) Amidoamino quaternary ammonium salt.
P-17-0333A........................ 6 01/16/2020 Miwon North America, (S) Reactive diluent (G) 2-Propenoic acid, mixed esters with
Inc. for optical film heterocyclic dimethanol and heterocyclic
coating. methanol.
P-17-0395A........................ 6 01/24/2020 CBI.................. (G) Water treatment (G) Alkyl tri dithiocarbmate tri salt.
additive.
P-18-0007A........................ 3 12/20/2019 Nexoleum USA Corp.... (S) Used as a (S) Glycerides, soya mono- and di-,
plasticizer/ epoxidized, acetates.
stabilizer for
flexible PVC.
P-18-0007A........................ 4 12/27/2019 Nexoleum USA Corp.... (S) Used as a (S) Glycerides, soya mono- and di-,
plasticizer/ epoxidized, acetates.
stabilizer for
flexible PVC.
P-18-0008A........................ 3 12/20/2019 Nexoleum USA Corp.... (S) Used as a (S) Glycerides, C16-18 and C18-unsatd. mono-
plasticizer/ and di-, epoxidized, acetates.
stabilizer for
flexible PVC.
P-18-0008A........................ 4 12/27/2019 Nexoleum USA Corp.... (S) Used as a (S) Glycerides, C16-18 and C18-unsatd. mono-
plasticizer/ and di-, epoxidized, acetates.
stabilizer for
flexible PVC.
P-18-0012A........................ 6 12/19/2019 CBI.................. (G) Adhesives....... (G) Polyester polyol.
P-18-0031A........................ 7 01/09/2020 CBI.................. (G) Ingredient for (G) Substituted dicarboxylic acid, polymer
industrial coating. with various alkanediols.
[[Page 13894]]
P-18-0058A........................ 3 01/29/2020 CBI.................. (S) Component of (S) Phosphonium, trihexyltetradecyl-, salt
electroconductive with 1,1,1-trifluoro-N-
low-noise grease [(trifluoromethyl)sulfonyl]methanesulfonamid
for long-term e (1:1).
lubrication of
capped or sealed
ball bearings.
P-18-0063A........................ 3 01/16/2020 Ethox Chemicals, LLC. (G) This material is (G) alcohol alkoxylate phosphate.
used as a lubricant
additive for
applications such
as stamping,
forming, cutting,
drilling, or
otherwise working
metals.
P-18-0067A........................ 4 01/12/2020 CBI.................. (G) Adjuvant agent.. (S) Fatty acids, C14-18 and C16-18-unsatd.,
polymers with adipic acid and
triethanolamine, di-Me sulfate-quaternized.
P-18-0070A........................ 10 12/20/2019 Arrowstar, LLC....... (G) Chemical (G) Waste plastics, polyester, depolymd. with
intermediate for glycols, polymers with dicarboxylic acids.
polyurethane
industry.
P-18-0093A........................ 4 12/19/2019 CBI.................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxa
ne, 1,3,5,7,9,11,13,15-octakis
(polyfluoroalkyl)-.
P-18-0094A........................ 4 12/19/2019 CBI.................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxa
nealkylsubstituted, 3,5,7,9,11,13,15-
heptakis(polyfluoroalkyl)-.
P-18-0095A........................ 4 12/19/2019 CBI.................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxa
nealkanol, 3,5,7,9,11,13,15-
heptakis(polyfluoroalkyl)-, acetate.
P-18-0104A........................ 7 01/28/2020 CBI.................. (S) Halogen free (G) Acrylic acid, reaction products with
flame retardant in pentaerythritol, polymerized.
thermoplastic
polymers.
P-18-0108A........................ 2 01/20/2020 CBI.................. (G) Ionic salt of a (G) Aromatic anhydride polymer with
polyamic acid for bisalkylbiphenylbisamine compound with
coatings, open, non- alkylaminoalkyl acrylate ester.
dispersive use.
P-18-0151A........................ 7 12/17/2019 Struers, Inc......... (S) A curing agent (S) Formaldehyde, reaction products with 1,3-
for curing epoxy benzenedimethanamine and p-tert-butylphenol.
systems.
P-18-0151A........................ 8 01/28/2020 Struers, Inc......... (S) A curing agent (S) Formaldehyde, reaction products with 1,3-
for curing epoxy benzenedimethanamine and p-tert-butylphenol.
systems.
P-18-0173A........................ 3 01/13/2020 CBI.................. (S) Thickener for (G) Poly (oxy1,2-alkydiyl) hydroxy polymer
paint and coatings. with cyanoato butylalcohol.
P-18-0187A........................ 4 01/09/2020 CBI.................. (G) Emulsifier...... (G) Carboxylic acid-polyamine condensate.
P-18-0226A........................ 6 12/19/2019 CBI.................. (G) Anti-agglomerate (G) Tri alkyl, mono alkoxy, fatty acid ester,
ammonium salt.
P-18-0307A........................ 3 01/16/2020 CBI.................. (G) Binder resin in (G) Alkyl Alkenoic acid, alkyl ester, telomer
coatings. with alkyl alkenoate, substituted alkyl
alkyl alkenoate, alkylthiol, substituted
carbomonocycle, hydroxyalkyl alkyl alkenoate
and alkyl alkyl alkenoate.
P-18-0328A........................ 2 01/06/2020 CBI.................. (G) Chemical (G) Plant oil fatty acids, alkyl esters.
intermediate for
the manufacture of
plasticizer.
P-18-0329A........................ 2 12/19/2019 CBI.................. (G) Component of (G) Substituted carbopolycyclic dicarboxylic
lenses used in acid dialkyl ester, polymer with alkanediol
electronic and carbopolycyclic bis (substituted
applications. carbopolycycle) bisalkanol.
P-19-0002A........................ 5 12/17/2019 CBI.................. (S) Chemical (G) Polyaromatic symmetrical tetracarboxylic
Intermediate. acid.
P-19-0003A........................ 4 12/17/2019 CBI.................. (S) Chemical (G) Polyaromatic ether symmetrical
Intermediate. dicarboxylic anhydride.
P-19-0004A........................ 4 12/17/2019 CBI.................. (G) molded parts and (G) Aromatic dianhydride, polymer with
components. aromatic diamine and heteroatom bridged
aromatic diamine, reaction products with
aromatic anhydride.
P-19-0048A........................ 4 12/18/2019 CBI.................. (G) Coating additive (S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-
.omega.-hydroxy-, mono-C12-14-alkyl ethers,
phosphates, sodium salts.
P-19-0048A........................ 5 12/19/2019 CBI.................. (G) Coating additive (S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-
.omega.-hydroxy-, mono-C12-14-alkyl ethers,
phosphates, sodium salts.
[[Page 13895]]
P-19-0053A........................ 6 12/20/2019 Wacker Chemical (S) Used as a (S) 1-Butanamine, N-butyl-N-
Corporation. surface treatment, [(triethoxysilyl)methyl]-.
sealant, caulk, and
coating for mineral
building materials
such as concrete,
brick, limestone,
and plaster, as
well as on wood,
metal and other
substrates.
Formulations
containing the
cross-linker
provide release and
anti-graffiti
properties, water
repellency, weather
proofing, and
improved bonding in
adhesive/sealant
applications. The
new substance is a
moisture curing
cross-linking agent
which binds/joins
polymers together
when cured. Ethanol
is released during
cure, and once the
cure reaction is
complete, the
product will remain
bound in the cured
polymer matrix.
P-19-0095A........................ 6 01/23/2020 CBI.................. (G) Consumer (G) Poly hydroxy alkanoate.
Disposables, (G)
Polymer Sheet, (G)
Durable Goods.
P-19-0103A........................ 5 01/06/2020 CBI.................. (G) Well performance (G) Halogenated benzoic acid, ethyl ester.
monitor.
P-19-0109A........................ 5 01/09/2020 Arch Chemicals, Inc.. (S) Chemical is used (S) Copper, [[2,2',2''-(nitrilo-
as a component of a .kappa.N)tris[ethanolato-.kappa.O]](2-)]-;
cleaning (S) Copper, bis[2-(amino-.kappa.N)ethanolato-
formulation to .kappa.O]-;.
improve the
wettability of the
overall cleaning
solution on the
substrate.
P-19-0109A........................ 6 01/14/2020 Arch Chemicals, Inc.. (S) Chemical is used (S) Copper, [[2,2',2''-(nitrilo-
as a component of a .kappa.N)tris[ethanol-.kappa.O]](2-)]-; (S)
cleaning Copper, bis[2-(amino-.kappa.N)ethanolato-
formulation to .kappa.O]-;.
improve the
wettability of the
overall cleaning
solution on the
substrate.
P-19-0109A........................ 7 01/23/2020 Arch Chemicals, Inc.. (S) Chemical is used (S) Copper, [[2,2',2''-(nitrilo-
as a component of a .kappa.N)tris[ethanolato-.kappa.O]](2-)]-
cleaning ;(S) Copper, bis[2-(amino-
formulation to .kappa.N)ethanolato-.kappa.O]-;.
improve the
wettability of the
overall cleaning
solution on the
substrate.
P-19-0143A........................ 5 12/23/2019 Aditya Birla (S) A crosslinking (G) Aldehyde, polymer with mixed
Chemicals (USA), LLC. agent for use in alkanepolyamines, 2,2'-[1,4-
epoxy resin for alkanediylbis(oxyalkylene)] bis[oxirane], 2-
water-based coating (alkoxyalkyloxirane, 4,4'-(1-
for a variety of alkylidene)bis[phenol], 2,2'-[(1-
substrates and alkylidene)bis(4,1-
civil applications alkyleneoxyalkylene)]bis[oxirane] and 2-
in commercial and (aryloxyalkyl)oxirane, acetate (salt).
consumer usages.
[[Page 13896]]
P-19-0144A........................ 5 12/23/2019 Aditya Birla (S) A crosslinking (G) Alkanedioic Acid, compds. With
Chemicals (USA), LLC. agent in epoxy substituted arylalkylamine- arylalcohol
based self-leveling disubstituted alkane-the diglycidyl ether of
floor coatings. a arylalcohol disubstituted alkane -
epichlorohydrin-aldehyde-2,2'-[(1-
alkylidene)bis[4,1-aryleneoxy(alkyl-2,1-
alkanediyl)oxyalkylene]]bis[oxirane]-
alkanepolyamine polymer-1-[[2-[(2-
aminoalkyl)amino]alkyl]amino]-3-aryloxy-2-
alcohol reaction products.
P-19-0155A........................ 5 12/17/2019 Huntsman (S) Adjuvant for (S) Amides, from C8-18 and C18-unsatd.
International, LLC. agrochemical glycerides and diethylenetriamine,
formulations. ethoxylated.
P-19-0156A........................ 5 12/17/2019 Huntsman (S) Adjuvant for (S) Amides, from diethylenetriamine and palm
International, LLC. agrochemical kernel-oil, ethoxylated.
formulations.
P-19-0157A........................ 5 12/17/2019 Huntsman (S) Adjuvant in (S) Amides, from coconut oil and
International, LLC. agrochemical diethylenetriamine, ethoxylated.
formulations.
P-19-0158A........................ 6 01/06/2020 Ashland, Inc......... (G) Adhesive........ (G) Alkenoic acid polymer with 2-ethyl-2-
(hdroxymethyl)-1,3-alkyldiol, 1,1'-
methylenebis(4-isocyantocarbomonocycle) and
3-methyl-1,5-aklydiol.
P-19-0164A........................ 2 01/03/2020 Allnex USA, Inc...... (S) Site limited (G) Bis-alkoxy substituted alkane, polymer
intermediate for with aminoalkanol.
coating resin
manufacture.
P-19-0166A........................ 2 01/30/2020 Fujifilm Electronic (G) Photoacid (G) Triarylsulfonium alkylestersulfonate,.
Materials USA, Inc. generator (PAG).
P-19-0168A........................ 5 12/19/2019 CBI.................. (G) Well performance (G) Halogenated alkylbenzoic acid.
tracer.
P-19-0169A........................ 5 12/19/2019 CBI.................. (G) Well performance (G) Halogenated alkylbenzoic acid.
monitor.
P-20-0010A........................ 3 01/07/2020 CBI.................. (G) Polymerization (G) Carboxylic acid, reaction products with
auxiliary. metal hydroxide, inorganic dioxide and
metal.
P-20-0015......................... 4 01/13/2020 GE Healthcare........ (S) The polymer is (G) Zwitterionic polysulfone polymer;(G) N-
used in the alkyl heteromonocyclic diphenolamide,
manufacture of polymer with Bisphenol A, haloaryl-
hollow fiber substituted sulfone, compd. with cyclic
products. sulfonate ester, polyaryl alcohol
terminated.
P-20-0025A........................ 2 12/17/2019 Biosynthetic (S) Motor oil (S) Octadecanoic acid, 12-(acetoxy)-, 2-
Technologies. lubricant, ethylhexyl ester.
formulation #1
(prepared at a
processor which is
controlled by
others),(S) Motor
oil lubricant,
formulation #2
(prepared at a
processor which is
controlled by
others).
P-20-0025A........................ 3 01/07/2020 Biosynthetic (S) Motor oil (S) Octadecanoic acid, 12-(acetoxy)-, 2-
Technologies. lubricant, ethylhexyl ester.
formulation #1
(prepared at a
processor which is
controlled by
others),(S) Motor
oil lubricant,
formulation #2
(prepared at a
processor which is
controlled by
others).
P-20-0026A........................ 3 01/13/2020 GE Healthcare........ (S) The new monomer (G) N-alkyl heteromonocyclic diphenolamide.
is isolated and
used for subsequent
polymerization.
P-20-0027......................... 5 01/10/2020 H.B. Fuller Company.. (S) Industrial (G) Glycols, alpha, omega-, c2-6, polymers
Adhesives. with adipic acid, dodecanedioic acid,
hydracrylic acid polyester, isophthalic
acid, 1,1'-methylenebis[4-
isocyanatobenzene], neopentyl glycol and
terephthalic acid.
P-20-0028......................... 5 01/10/2020 H.B. Fuller Company.. (S) Industrial (G) glycols, alpha, omega-, c2-6, polymers
Adhesives. with adipic acid, aromatic polyester,
dodecanedioic acid, hydracrylic acid
polyester, isophthalic acid, 1,1'-
methylenebis[4-isocyanatobenzene], neopentyl
glycol and terephthalic acid.
P-20-0029A........................ 3 01/14/2020 Kuraray America, Inc. (G) Oil soluble (S) Octanal, 7(or 8)-formyl-.
additive.
P-20-0031......................... 3 01/06/2020 CBI.................. (G) Intermediate.... (G) Perfluorinated substituted 1,3-
oxathiolane dioxide.
[[Page 13897]]
P-20-0032A........................ 2 01/15/2020 Engineered Bonded (S) Talathol PO3, (G) Polyethylene terephthalate polyol.
Structures and the material for
Composites. which this notice
is filed, is
intended to be used
as a copolymer in
the production of
urethane foam or
coating. This is
intended to replace
lauan (also spelled
luan) paneling
which is used in
manufacturing
prefabricated
buildings.
P-20-0032A........................ 3 01/24/2020 Engineered Bonded (S) Talathol PO3, (G) Polyethylene terephthalate polyol.
Structures and the material for
Composites. which this notice
is filed, is
intended to be used
as a copolymer in
the production of
urethane foam or
coating. This is
intended to replace
lauan (also spelled
luan) paneling
which is used in
manufacturing
prefabricated
buildings.
P-20-0033......................... 2 01/06/2020 CBI.................. (G) Intermediate.... (G) Perfluorinated vinyl haloalkane sulfonate
salt.
P-20-0034......................... 2 01/06/2020 CBI.................. (G) Intermediate.... (G) Perfluorinated vinyl haloalkane sulfonyl
halide.
P-20-0035A........................ 2 01/21/2020 CBI.................. (G) Colorant........ (G) Substituted aromatic, 3,3'-[[6-
[(substituted alkyl amino)]-1,3,5-triazine-
2,4-diyl]bis[imino[2-(substituted)-5-
[substituted alkoxy]-4,1-phenylene]-2,1-
diazenediyl]]bis[substituted, sodium salt].
P-20-0039......................... 2 01/12/2020 Miwon North America, (S) Resins for (G) Hexanedioic acid, polymer with
Inc. Industrial coating. alkyl(substituted-alkyl)-alkanediol and 1,3-
isobenzofurandione, 2-propenoate.
P-20-0040......................... 4 01/06/2020 CBI.................. (G) Additive for use (G) 2-Propenoic acid, cycloalkyl ester,.
in inks, coatings,
adhesives and
sealants.
P-20-0041......................... 2 01/07/2020 Kuraray America, Inc. (G) Chemical (S) 1,3-Benzenedicarboxylic acid, polymer
Intermediate for with 3-methyl-1,5-pentanediol.
Coatings.
P-20-0042......................... 2 01/08/2020 CBI.................. (G) Photoresist use (G) Sulfonium, trisaryl-, 7,7-dialkyl-2-
at customer. heteropolycyclic -1-alkanesulfonate (1:1).
P-20-0042A........................ 3 01/14/2020 CBI.................. (G) Photoacid (G) Sulfonium, trisaryl-, 7,7-dialkyl-2-
generator use at heteropolycyclic -1-alkanesulfonate (1:1).
customer.
P-20-0044......................... 1 01/23/2020 Angus Chemical (G) curing additive: (S) 1-Propanamine, 3-methoxy-N,N-dimethyl.
Company. automotive paint
(G) neutralization,
stability and
pigment dispersancy
in industrial latex
paints (G)
neutralization,
solubilization and
stability in
commercial
waterborne and
solvent borne
coatings and
varnishes used for
wood, metal,
compositites, and
other substrates
(G) solubilizer for
high acid value
styrene acrylic
polymers for use in
ink applications
(G) additive for
industrial
polyurethane
dispersions.
[[Page 13898]]
P-20-0046......................... 1 01/28/2020 CBI.................. (G) Catalyst........ (G) Reaction products of alkyl-terminated
alkylalumuminoxanes and {[(pentaalkylphenyl-
(pentaalkylphenyl)amino)alkyl]alkanediaminat
o{time} bis(aralkyl) transition metal
coordination compound.
P-20-0051......................... 1 01/31/2020 CBI.................. (S) Curing agent for (S) 1,8-Octanediamine, 4-(aminomethyl)-, N-
Industrial epoxy benzyl derivs.
coating systems.
SN-17-0011A....................... 3 01/16/2020 CBI.................. (G) Foam additive (G) Polyfluorohydrocarbon.
(G) Specialty gas
and transfer fluid.
--------------------------------------------------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided
with the submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 01/01/2020 to 01/31/2020
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type
Case No. Received date date of amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-16-0022........................ 01/27/2020 01/27/2020 N.................. (G) Modified trichoderma
reesei.
P-10-0002........................ 12/16/2019 12/16/2019 N.................. (S) Soil organic matter,
alkaline extract,
potassium salt.
P-10-0438........................ 01/07/2020 07/19/2011 N.................. (G) 2-propenoic acid,
homopolymer, ester with
.alpha.-methyl-
polyether compd. with
aminoalcohol.
P-16-0310A....................... 12/18/2019 04/09/2018 Generic chemical (G) 12-hydroxystearic
name. acid, reaction products
with alkylene diamine
and alkanoic acid.
P-16-0314........................ 01/28/2020 01/23/2020 N.................. (S) Ethanone, 1-(5-
propyl-1,3-benzodioxol-
2-yl)-.
P-16-0509........................ 01/13/2020 12/17/2019 N.................. (G) Modified ethylene-
vinyl alcohol
copolymer.
P-16-0573........................ 01/09/2020 02/07/2018 N.................. (G) Rosin, tall oil,
reaction products with
polyalkylene-
polysubstituted-
terephthalic acid
polymer.
P-17-0321........................ 01/09/2020 01/09/2020 N.................. (S) 1,3,5-naphthalene
trisulfonic acid
trisodium salt.
P-17-0368........................ 01/06/2020 01/05/2020 N.................. (G) Vegetable oil,
polymer with
alkanedioic acid,
alkali lignin,
diethylene glycol- and
polyol-depolymd.
poly(ethylene
terephthalate) waste
plastics.
P-17-0398........................ 01/10/2020 11/07/2019 N.................. (S) Waste plastics,
pyrolyzed, depolymd.,
c11 to c33
branched,cyclic and
linear fraction.a
complex combination of
hydrocarbons obtained
from the fractional
condensation of
polyolefins and vinyl
polymers waste
plastics. it consists
predominately of c11 to
c33 branched, cyclic
and linear hydrocarbons
and boils in the range
of 350 degrees c to 450
degrees c(662 degrees f
to 842 degrees f).
P-17-0399........................ 01/10/2020 11/07/2019 N.................. (S) Waste plastics,
pyrolyzed, depolymd.,
c7 to c26-branched,
cyclic and linear
fraction. a complex
combination of
hydrocarbons obtained
from the fractional
condensation of
polyolefins and vinyl
polymers waste
plastics. it consists
of predominately c7 to
c26 branched, cyclic
and linear hydrocarbons
and boils in the range
of 0 degrees c to 350
degrees c (32 degrees f
to 662 degrees f).
P-17-0405........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trifluoro-, ethyl
ester.
P-17-0406........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trifluoro-, ethyl
ester.
P-17-0407........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trifluoro-, ethyl
ester.
P-17-0408........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trichloro-,ethyl ester.
P-17-0409........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trichloro-,ethyl ester.
P-17-0410........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trichloro-,ethyl ester.
P-17-0411........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,4-
trichloro-,ethyl ester.
P-17-0412........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,5-
trichloro-,ethyl ester.
P-17-0414........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trilfuoro.
P-17-0415........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trifluoro-.
P-17-0416........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trifluoro-.
P-17-0417........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trichloro-.
[[Page 13899]]
P-17-0418........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trichloro-.
P-17-0420........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trichloro-.
P-17-0421........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 3,4,5-
trichloro-.
P-17-0422........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,5-
trichloro-.
P-17-0423........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 3,4,5-
trichloro-, ethyl
ester.
P-17-0441A....................... 12/31/2019 12/31/2019 Withdrew CBI claim. (S) Benzoic acid, 2,4,6-
trifluoro-, sodium salt
(1:1).
P-17-0442........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trifluoro-, sodium salt
(1:1).
P-17-0443........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trifluoro-, sodium salt
(1:1).
P-17-0444........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trichloro-, sodium salt
(1:1).
P-17-0445........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trichloro-, sodium salt
(1:1).
P-17-0446........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trichloro-, sodium salt
(1:1).
P-17-0447........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,5-
trichloro-, sodium salt
(1:1).
P-17-0448........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 3,4,5-
trichloro-, sodium salt
(1:1).
P-17-0449........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,4-
trichloro-, sodium salt
(1:1).
P-17-0450........................ 12/31/2019 12/31/2019 N.................. (S) 2,5-dichlorobenzoic
acid.
P-18-0018........................ 01/06/2020 12/11/2019 N.................. (G) Fluorinated
acrylate, polymer with
alkyloxirane
homopolymer monoether
with alkanediol mono(2-
methyl-2-propenoate),
tert-bu 2-
ethylhexaneperoxoate-
initiated.
P-18-0091........................ 01/06/2020 01/05/2020 N.................. (G) Vegetable oil,
polymers with
diethylene glycol- and
polyol- and
polyethylene glycol-
depolymd. poly(ethylene
terephthalate) waste
plastics and
arylcarboxylic acid
anhydride.
P-18-0101........................ 12/27/2019 12/06/2019 N.................. (G) Polyol esters.
P-18-0179........................ 01/20/2020 01/13/2020 N.................. (G) Phenolic resin,
alkali, polymer with
formaldehyde and
phenol, sodium salt.
P-18-0234........................ 01/08/2020 12/09/2019 N.................. (G) Alkenoic acid,
reaction products with
bis substituted alkane
and ether polyol,.
P-18-0285........................ 01/07/2020 12/27/2019 N.................. (S) Butanedioic acid, 2-
methylene-, polymer
with 2-methyl- 2-[(1-
oxo-2-propen-1-
yl)amino]-1-
propanesulfonic acid,
sodium zinc salt.
P-18-0392........................ 01/17/2020 01/04/2020 N.................. (S) 2-oxazolidinone, 3-
ethenyl-5-methyl-.
P-18-0401........................ 01/21/2020 12/26/2019 N.................. (S) Glycerides, c16-18
and ci8-unsatd. mono-
and di-, citrates.
P-18-0402........................ 12/20/2019 12/19/2019 N.................. (G) Phenol,
alkanediylbis(iminoalky
lene)bis-,
bis(polyisoalkylene)
derivs.
P-19-0034........................ 01/20/2020 01/07/2020 N.................. (G) Metal, bis(2,4-
pentanedionato-ko2,ko4)-
, (t-4)-,.
P-19-0097........................ 12/18/2019 12/18/2019 N.................. (S) Benzoic acid, 5-
fluoro-2-methyl-, ethyl
ester.
P-19-0103........................ 01/09/2020 01/01/2020 N.................. (S) Benzoic acid, 3-
chloro-2-fluoro-, ethyl
ester.
P-19-0104........................ 12/18/2019 12/18/2019 N.................. (S) Benzoic acid, 2-
chloro-3-methyl-, ethyl
ester.
P-19-0108........................ 12/18/2019 12/18/2019 N.................. (S) Benzoic acid, 2-
chloro-4-methyl-, ethyl
ester.
P-19-0118........................ 01/10/2020 12/13/2019 N.................. (G) Substituted
polylalkylenepoly,
reaction products with
alkene polymer.
P-19-0146........................ 12/18/2019 12/03/2019 N.................. (G) Modified dimethyl
sulfoxide.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 01/01/2020 to 01/31/2020
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
L-20-0055............................. 01/27/2020 Ames Test..................... (G) Imidazo[4,5-
d]imidazole-2,5(1h,3h)-
dione, tetrahydro-
substituted alkyl-.
[[Page 13900]]
P-16-0349............................. 01/20/2020 Inherent Biodegradability (G) Quaternary ammonium
(OECD Test Guideline 302B), salt of polyisobutene
Acute Invertebrate Toxicity succinic acid.
Freshwater Daphnids (OCSPP
Test Guideline 850.1010),
Fish Acute Toxicity (Rainbow
Trout) Study and Fish Acute
Toxicity (Sheepshead Minnow)
Study (OCSPP Test Guideline
850.1075), Fish Acute
Toxicity with Humic Acid
Rainbow Trout) (OCSPP Test
Guideline 850.1085) and Algae
Acute Toxicity Study (OCSPP
850.4500).
P-16-0462............................. 01/21/2020 Metals Analysis Report........ (G) Silane-treated
aluminosilicate.
P-17-0195............................. 01/15/2020 Combined Repeated Dose and (G) 1,3-propanediol,2-
Reproductive/Developmental methylene-,
Toxicity Test of [claimed substituted.
CBI] by Oral Administration
in Rats (OECD Test Guideline
422).
P-18-0293............................. 12/18/2019 In vitro Skin Irritation Test (S) Propanedioic acid, 2-
with Chemilian L3000 XP using methylene-, 1,3-dihexyl
a Human Skin Model (OECD 439) ester.
and In vitro Skin Irritation
Test with Chemilian H4000 XP
using a Human Skin Model
(OECD 439).
P-18-0293............................. 01/22/2020 An Acute Study of Chemilian (S) Propanedioic acid, 2-
L3000 XP by Oral Gavage in methylene-, 1,3-dihexyl
Rat (Fixed Dose Method). ester.
P-18-0294............................. 01/24/2020 An Acute Study of Chemilian (S) Propanedioic acid, 2-
H4000 XP by Oral Gavage in methylene-, 1,3-
Rat (Fixed Dose Method). dicyclohexyl ester.
P-18-0294............................. 01/15/2020 An Acute Study of Chemilian (S) Propanedioic acid, 2-
H4000 XP by Oral Gavage in methylene-, 1,3-
Rat (Fixed Dose Method). dicyclohexyl ester.
P-18-0351............................. 01/16/2020 Drum Emptying Study........... (G) Acrylic acid,
tricyclo alkyl ester.
P-19-0147............................. 12/20/2019 Algal Study Supplement........ (G) Alkoxylated butyl
alkyl ester.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 4, 2020.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-04891 Filed 3-9-20; 8:45 am]
BILLING CODE 6560-50-P