[Federal Register Volume 85, Number 122 (Wednesday, June 24, 2020)] [Notices] [Pages 37942-37944] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2020-13581] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2019-0437; FRL-10011-16] Methylene Chloride (MC); Final Toxic Substances Control Act (TSCA) Risk Evaluation; Notice of Availability AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: The Environmental Protection Agency (EPA) is announcing the availability of the final Toxic Substances Control Act (TSCA) risk evaluation of methylene chloride (MC). The purpose of conducting risk evaluations under TSCA is to determine whether a chemical substance presents an unreasonable risk of injury to health or the environment under the conditions of use, including an unreasonable risk to a relevant potentially exposed or susceptible subpopulation. EPA has determined that specific conditions of use of methylene [[Page 37943]] chloride present an unreasonable risk of injury to health. For those conditions of use for which EPA has found an unreasonable risk, EPA must move to address that unreasonable risk through risk management measures enumerated in TSCA. EPA has also determined that specific conditions of use do not present unreasonable risk of injury to health or the environment. For those conditions of use for which EPA has found no unreasonable risk to health or the environment, the Agency's determination is a final Agency action and is issued via order in the risk evaluation. ADDRESSES: The docket for this action, identified by docket identification (ID) number EPA-HQ-OPPT-2019-0437, is available online at http://www.regulations.gov or in-person at the Office of Pollution Prevention and Toxics Docket (OPPT Docket), Environmental Protection Agency Docket Center (EPA/DC), West William Jefferson Clinton Bldg., Rm. 3334, 1301 Constitution Ave., NW, Washington, DC. The Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Please review the visitor instructions and additional information about the docket available at http://www.epa.gov/dockets. Please note that due to the public health emergency the EPA Docket Center (EPA/DC) and Reading Room was closed to public visitors on March 31, 2020. Our EPA/DC staff will continue to provide customer service via email, phone, and webform. For further information on EPA/DC services, docket contact information and the current status of the EPA/ DC and Reading Room, please visit https://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Dr. Stan Barone, Office of Pollution Prevention and Toxics (7403M), Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-1169; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. This action may be of interest to persons who are or may be interested in risk evaluations of chemical substances under TSCA, 15 U.S.C. 2601 et seq. Since other entities may also be interested in this final risk evaluation, the EPA has not attempted to describe all the specific entities that may be affected by this action. B. What is EPA's authority for taking this action? TSCA section 6, 15 U.S.C. 2605, requires EPA to conduct risk evaluations to ``determine whether a chemical substance presents an unreasonable risk of injury to health or the environment, without consideration of costs or other nonrisk factors, including an unreasonable risk to a potentially exposed or susceptible subpopulation identified as relevant to the risk evaluation by the Administrator, under the conditions of use.'' 15 U.S.C. 2605(b)(4)(A). TSCA sections 6(b)(4)(A) through (H) enumerate the deadlines and minimum requirements applicable to this process, including provisions that provide instruction on chemical substances that must undergo evaluation, the minimum components of a TSCA risk evaluation, and the timelines for public comment and completion of the risk evaluation. TSCA also requires that EPA operate in a manner that is consistent with the best available science, make decisions based on the weight of the scientific evidence and consider reasonably available information. 15 U.S.C. 2625(h), (i), and (k). TSCA section 6(i) directs that a determination of ``no unreasonable risk'' shall be issued by order and considered to be a final Agency action, while a determination of ``unreasonable risk'' is not considered to be a final Agency action. 15 U.S.C. 2605(i). The statute identifies the minimum components for all chemical substance risk evaluations. For each risk evaluation, EPA must publish a document that outlines the scope of the risk evaluation to be conducted, which includes the hazards, exposures, conditions of use, and the potentially exposed or susceptible subpopulations that EPA expects to consider. 15 U.S.C. 2605(b)(4)(D). The statute further provides that each risk evaluation must also: (1) Integrate and assess available information on hazards and exposures for the conditions of use of the chemical substance, including information that is relevant to specific risks of injury to health or the environment and information on relevant potentially exposed or susceptible subpopulations; (2) describe whether aggregate or sentinel exposures were considered and the basis for that consideration; (3) take into account, where relevant, the likely duration, intensity, frequency, and number of exposures under the conditions of use; and (4) describe the weight of the scientific evidence for the identified hazards and exposures. 15 U.S.C. 2605(b)(4)(F)(i)-(ii) and (iv)-(v). Each risk evaluation must not consider costs or other nonrisk factors. 15 U.S.C. 2605(b)(4)(F)(iii). The statute requires that the risk evaluation process be completed within a specified timeframe and provide an opportunity for public comment on a draft risk evaluation prior to publishing a final risk evaluation. 15 U.S.C. 2605(b)(4). In conducting risk evaluations, ``EPA will determine whether the chemical substance presents an unreasonable risk of injury to health or the environment under each condition of use within the scope of the risk evaluation . . .'' 40 CFR 702.47. Pursuant to TSCA section 6(i)(1), a determination of ``no unreasonable risk'' shall be issued by order and considered to be final Agency action. Under EPA's implementing regulations, ``[a] determination by EPA that the chemical substance, under one or more of the conditions of use within the scope of the risk evaluation, does not present an unreasonable risk of injury to health or the environment will be issued by order and considered to be a final Agency action, effective on the date of issuance of the order.'' 40 CFR 702.49(d). Subsection 5.4.1 of the final risk evaluation for MC constitutes the order required under TSCA section 6(i)(1), and the ``no unreasonable risk'' determinations in that subsection are considered to be a final Agency action effective on the date of issuance of the order. C. What action is EPA taking? EPA is announcing the availability of the risk evaluation of the chemical substance identified in Unit II. In this risk evaluation EPA has made unreasonable risk determinations on all the conditions of use within the scope of the risk evaluation for this chemical. For those conditions of use for which EPA has found an unreasonable risk of injury to health or the environment, EPA must move to address those risks through risk management measures enumerated in 15 U.S.C. 2605(a). For those conditions of use for which EPA has found no unreasonable risk of injury to health or the environment, the Agency's determination is a final [[Page 37944]] Agency action and is issued via order, per 15 U.S.C. 2605(i)(1), in the risk evaluation, subsection 5.4.1. EPA is also announcing the availability of the information required to be provided publicly with each risk evaluation. 40 CFR 702.51. Specifically, EPA has provided:The scope document and problem formulation (in Docket EPA- HQ-OPPT-2016-0742); Draft risk evaluation, and final risk evaluation (in Docket EPA-HQ-OPPT-2019-0437); All notices, determinations, findings, consent agreements, and orders (in Docket EPA-HQ-OPPT-2019-0437); Any information required to be provided to the Agency under 15 U.S.C. 2603 (in Docket EPA-HQ-OPPT-2016-0742 and Docket EPA- HQ-OPPT-2019-0437); A nontechnical summary of the risk evaluation (in Docket EPA-HQ-OPPT-2019-0437); A list of the studies, with the results of the studies, considered in carrying out each risk evaluation (Risk Evaluation for Methylene Chloride (Dichloromethane, DCM) in Docket EPA-HQ-OPPT-2019- 0437); The final peer review report, including the response to peer review and public comments received during peer review (in Docket EPA-HQ-OPPT-2019-0437); and Response to public comments received on the draft scope and the draft risk evaluation (in Docket EPA-HQ-OPPT-2019-0437). II. TSCA Risk Evaluation A. What is EPA's risk evaluation process for existing chemicals under TSCA? The risk evaluation process is the second step in EPA's existing chemical process under TSCA, following prioritization and before risk management. As this chemical is one of the first ten chemical substances undergoing risk evaluation, the chemical substance was not required to go through prioritization (81 FR 91927, December 19, 2016) (FRL-9956-47). The purpose of conducting risk evaluations is to determine whether a chemical substance presents an unreasonable risk of injury to health or the environment under the conditions of use, including an unreasonable risk to a relevant potentially exposed or susceptible subpopulation. As part of this process, EPA must evaluate both hazard and exposure, not consider costs or other nonrisk factors, use reasonably available information and approaches in a manner that is consistent with the requirements in TSCA for the use of the best available science, and ensure decisions are based on the weight of scientific evidence. The specific risk evaluation process that EPA has established by rule to implement the statutory process is set out in 40 CFR part 702 and summarized on EPA's website at http://www.epa.gov/assessing-and-managing-chemicals-under-tsca/risk-evaluations-existing-chemicals-under-tsca. As explained in the preamble to EPA's final rule on procedures for risk evaluation (82 FR 33726, July 20, 2017) (FRL-9964- 38), the specific regulatory process set out in 40 CFR part 702, subpart B is being followed for the first ten chemical substances undergoing risk evaluation to the maximum extent practicable. Prior to the publication of this final risk evaluation, a draft risk evaluation was subject to peer review and public comment. EPA reviewed the report from the peer review committee and public comments and has amended the risk evaluation in response to these comments as appropriate. The public comments, peer review report, and EPA's response to comments is in Docket EPA-HQ-OPPT-2019-0437. Prior to the publication of the draft risk evaluation, EPA made available the scope and problem formulation, and solicited public input on uses and exposure. EPA's documents and the public comments are in Docket EPA-HQ- OPPT-2016-0732. Additionally, information about the scope, problem formulation, and draft risk evaluation phases of the TSCA risk evaluation for this chemical is at http://www.epa.gov/assessing-and-managing-chemicals-under-tsca/risk-evaluation-methylene-chloride-0. B. What is methylene chloride? Methylene chloride (MC), also known as dichloromethane and DCM, is a volatile chemical used as a solvent in a wide range of industrial, commercial and consumer applications. The primary uses for methylene chloride are for paint removal, adhesives, metal cleaning, aerosol solvents, chemical processing and flexible polyurethane foam manufacturing. Information from the 2016 Chemical Data Reporting (CDR) for MC indicates the reported production volume is more than 260 million lbs per year (manufacture and import). Authority: 15 U.S.C. 2601 et seq. Dated: June 17, 2020. Andrew Wheeler, Administrator. [FR Doc. 2020-13581 Filed 6-23-20; 8:45 am] BILLING CODE 6560-50-P