[Federal Register Volume 84, Number 245 (Friday, December 20, 2019)]
[Rules and Regulations]
[Pages 69995-69997]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-27468]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2019-0704; Product Identifier 2019-NM-132-AD; Amendment
39-19813; AD 2019-24-10]
RIN 2120-AA64
Airworthiness Directives; Airbus SAS Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
certain Airbus SAS Model A350-941 airplanes. This AD was prompted by an
investigation that identified the cargo lining gutter assembly would be
unable to drain a certain quantity of water in case of leakage or
rupture of certain water pipes. This AD requires modification of the
cargo lining gutter assemblies, as specified in a European Union
Aviation Safety Agency (EASA) AD, which is incorporated by reference.
The FAA is issuing this AD to address the unsafe condition on these
products.
DATES: This AD is effective January 24, 2020.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of January 24,
2020.
ADDRESSES: For the material incorporated by reference (IBR) in this AD,
contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany;
telephone +49 221 89990 1000; email [email protected]; internet
www.easa.europa.eu. You may find this IBR material on the EASA website
at https://ad.easa.europa.eu. You may view this IBR material at the
FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA.
For information on the availability of this material at the FAA, call
206-231-3195. It is also available in the AD docket on the internet at
https://www.regulations.gov by searching for
[[Page 69996]]
and locating Docket No. FAA-2019-0704.
Examining the AD Docket
You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-
0704; or in person at Docket Operations between 9 a.m. and 5 p.m.,
Monday through Friday, except Federal holidays. The AD docket contains
this final rule, the regulatory evaluation, any comments received, and
other information. The address for Docket Operations is U.S. Department
of Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Kathleen Arrigotti, Aerospace
Engineer, International Section, Transport Standards Branch, FAA, 2200
South 216th St., Des Moines, WA 98198; telephone and fax 206-231-3218.
SUPPLEMENTARY INFORMATION:
Discussion
The EASA, which is the Technical Agent for the Member States of the
European Union, has issued EASA AD 2019-0183, dated July 26, 2019
(``EASA AD 2019-0183'') (also referred to as the Mandatory Continuing
Airworthiness Information, or ``the MCAI''), to correct an unsafe
condition for certain Airbus SAS Model A350-941 airplanes.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 by adding an AD that would apply to certain Airbus SAS
Model A350-941 airplanes. The NPRM published in the Federal Register on
September 25, 2019 (84 FR 50339). The NPRM was prompted by an
investigation that identified the cargo lining gutter assembly would be
unable to drain a certain quantity of water in case of leakage or
rupture of certain water pipes. The NPRM proposed to require
modification of the cargo lining gutter assemblies.
The FAA is issuing this AD to address this condition, which, if not
corrected, could lead to fluid contamination of certain electrical
equipment and connectors, possibly resulting in the loss of several
flight control functions, with consequent reduced control of the
airplane. See the MCAI for additional background information.
Comments
The FAA gave the public the opportunity to participate in
developing this final rule. The FAA has considered the comments
received. The commenter John Motzel and two anonymous commenters stated
support for the NPRM.
Conclusion
The FAA reviewed the relevant data, considered the comments
received, and determined that air safety and the public interest
require adopting this final rule as proposed, except for minor
editorial changes. The FAA has determined that these minor changes:
Are consistent with the intent that was proposed in the
NPRM for addressing the unsafe condition; and
Do not add any additional burden upon the public than was
already proposed in the NPRM.
Related IBR Material Under 1 CFR Part 51
EASA AD 2019-0183 describes procedures for modifying the cargo
lining gutter assemblies. This material is reasonably available because
the interested parties have access to it through their normal course of
business or by the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 5 airplanes of U.S.
registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
17 work-hours x $85 per hour = $1,445........................ $12,000 $13,445 $67,225
----------------------------------------------------------------------------------------------------------------
According to the manufacturer, some or all of the costs of this AD
may be covered under warranty, thereby reducing the cost impact on
affected individuals. The FAA does not control warranty coverage for
affected individuals. As a result, the FAA has included all known costs
in the cost estimate.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
This AD is issued in accordance with authority delegated by the
Executive Director, Aircraft Certification Service, as authorized by
FAA Order 8000.51C. In accordance with that order, issuance of ADs is
normally a function of the Compliance and Airworthiness Division, but
during this transition period, the Executive Director has delegated the
authority to issue ADs applicable to transport category airplanes and
associated appliances to the Director of the System Oversight Division.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
[[Page 69997]]
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive (AD):
2019-24-10 Airbus SAS: Amendment 39-19813; Docket No. FAA-2019-0704;
Product Identifier 2019-NM-132-AD.
(a) Effective Date
This AD is effective January 24, 2020.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Airbus SAS Model A350-941 airplanes,
certificated in any category, as identified in European Union
Aviation Safety Agency (EASA) AD 2019-0183, dated July 26, 2019
(``EASA AD 2019-0183'').
(d) Subject
Air Transport Association (ATA) of America Code 92, Electric and
electronic common installation.
(e) Reason
This AD was prompted by an investigation that identified the
cargo lining gutter assembly would be unable to drain a certain
quantity of water in case of leakage or rupture of certain water
pipes. The FAA is issuing this AD to address this condition, which,
if not corrected, could lead to fluid contamination of certain
electrical equipment and connectors, possibly resulting in the loss
of several flight control functions, with consequent reduced control
of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Requirements
Except as specified in paragraph (h) of this AD: Comply with all
required actions and compliance times specified in, and in
accordance with, EASA AD 2019-0183.
(h) Exception to EASA AD 2019-0183
The ``Remarks'' section of EASA AD 2019-0183 does not apply to
this AD.
(i) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Section, Transport Standards Branch, FAA, has the
authority to approve AMOCs for this AD, if requested using the
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19,
send your request to your principal inspector or local Flight
Standards District Office, as appropriate. If sending information
directly to the International Section, send it to the attention of
the person identified in paragraph (j) of this AD. Information may
be emailed to: [email protected]. Before using any
approved AMOC, notify your appropriate principal inspector, or
lacking a principal inspector, the manager of the local flight
standards district office/certificate holding district office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Section, Transport Standards Branch, FAA; or EASA; or Airbus SAS's
EASA Design Organization Approval (DOA). If approved by the DOA, the
approval must include the DOA-authorized signature.
(3) Required for Compliance (RC): For any service information
referenced in EASA AD 2019-0183 that contains RC procedures and
tests: Except as required by paragraph (i)(2) of this AD, RC
procedures and tests must be done to comply with this AD; any
procedures or tests that are not identified as RC are recommended.
Those procedures and tests that are not identified as RC may be
deviated from using accepted methods in accordance with the
operator's maintenance or inspection program without obtaining
approval of an AMOC, provided the procedures and tests identified as
RC can be done and the airplane can be put back in an airworthy
condition. Any substitutions or changes to procedures or tests
identified as RC require approval of an AMOC.
(j) Related Information
For more information about this AD, contact Kathleen Arrigotti,
Aerospace Engineer, International Section, Transport Standards
Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone
and fax 206-231-3218.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) European Union Aviation Safety Agency (EASA) AD 2019-0183,
dated July 26, 2019.
(ii) [Reserved]
(3) For information about EASA AD 2019-0183, contact the EASA,
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221
89990 6017; email [email protected]; Internet www.easa.europa.eu.
You may find this EASA AD on the EASA website at https://ad.easa.europa.eu.
(4) You may view this material at the FAA, Transport Standards
Branch, 2200 South 216th St., Des Moines, WA. For information on the
availability of this material at the FAA, call 206-231-3195. This
material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-
2019-0704.
(5) You may view this material that is incorporated by reference
at the National Archives and Records Administration (NARA). For
information on the availability of this material at NARA, email
[email protected], or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Des Moines, Washington, on November 27, 2019.
Michael Kaszycki,
Acting Director, System Oversight Division, Aircraft Certification
Service.
[FR Doc. 2019-27468 Filed 12-19-19; 8:45 am]
BILLING CODE 4910-13-P