[Federal Register Volume 85, Number 48 (Wednesday, March 11, 2020)]
[Notices]
[Pages 14244-14246]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-04925]
-----------------------------------------------------------------------
INTERNATIONAL TRADE COMMISSION
[Investigation No. 337-TA-1082]
Certain Gas Spring Nailer Products and Components Thereof; Notice
of Commission Determination Finding a Violation of Section 337;
Issuance of Limited Exclusion Order and Cease and Desist Order;
Termination of the Investigation
AGENCY: U.S. International Trade Commission.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given that the U.S. International Trade
Commission (``the Commission'') has determined to find a violation of
section 337. Specifically, the Commission has determined to affirm in
part, reverse in part, and modify in part both an initial determination
(``ID'') and a remand initial determination (``RID'') of the presiding
administrative law judge (``ALJ''). The Commission has issued a limited
exclusion order (``LEO'') directed against infringing gas spring nailer
products and components thereof of respondent Hitachi Koki U.S.A., Ltd.
(``Hitachi'') of Braselton, Georgia and a cease and desist order
(``CDO'') directed
[[Page 14245]]
against Hitachi. The investigation is terminated.
FOR FURTHER INFORMATION CONTACT: Clint Gerdine, Esq., Office of the
General Counsel, U.S. International Trade Commission, 500 E Street SW,
Washington, DC 20436, telephone (202) 708-2310. Copies of non-
confidential documents filed in connection with this investigation are
or will be available for inspection during official business hours
(8:45 a.m. to 5:15 p.m.) in the Office of the Secretary, U.S.
International Trade Commission, 500 E Street SW, Washington, DC 20436,
telephone (202) 205-2000. General information concerning the Commission
may also be obtained by accessing its internet server at https://www.usitc.gov. The public record for this investigation may be viewed
on the Commission's electronic docket (EDIS) at https://edis.usitc.gov.
Hearing-impaired persons are advised that information on this matter
can be obtained by contacting the Commission's TDD terminal on (202)
205-1810.
SUPPLEMENTARY INFORMATION: The Commission instituted this investigation
on November 20, 2017, based on a complaint filed on behalf of Kyocera
Senco Brands Inc. (``Kyocera'') of Cincinnati, Ohio. 82 FR 55118-19
(Nov. 20, 2017). The complaint, as amended and supplemented, alleges
violations of section 337 of the Tariff Act of 1930, as amended, 19
U.S.C. 1337 (``section 337''), based upon the importation into the
United States, the sale for importation, and the sale within the United
States after importation of certain gas spring nailer products and
components thereof by reason of infringement of certain claims of U.S.
Patent Nos. 8,011,547 (``the '547 patent''); 8,267,296 (``the '296
patent''); 8,27,297 (``the '297 patent''); 8,387,718 (``the '718
patent''); 8,286,722 (``the '722 patent''); and 8,602,282 (``the '282
patent''). The complaint further alleges the existence of a domestic
industry. The Commission's notice of investigation named Hitachi as a
respondent. The Office of Unfair Import Investigations is not
participating in the investigation. The '547 patent has been terminated
from the investigation and the notice of investigation was amended to
add claim 30 of the '297 patent to the investigation. Order No. 13
(June 4, 2018), unreviewed by Comm'n Notice (June 22, 2018); Order No.
15 (June 19, 2018), unreviewed by Comm'n Notice (July 9, 2018), 83 FR
32685-66 (July 15, 2018). Prior to the evidentiary hearing, the parties
stipulated that the '718 patent is the only remaining patent at issue
because no violation could be shown as to the '296, '297, '722, and
'282 patents based on an evidentiary ruling limiting the Kyocera's
expert's testimony. See ID at 1-2. At the hearing, Kyocera asserted
claims 1, 10, and 16 (the ``asserted claims'') of the '718 patent. Id.
at 2, 21.
On June 7, 2019, the ALJ issued a final ID finding no violation of
section 337 as to the '718 patent based on non-infringement and the
failure of Kyocera to establish the existence of a domestic industry
(``DI'') that practices the '718 patent. Specifically, the ID finds
that Kyocera failed to show that the accused products or the domestic
industry products practice the asserted claims. The ID also finds that
Kyocera satisfied the economic prong of the DI requirement under
section 337(a)(3)(B). The ID also includes a recommended determination
on remedy and bonding (``RD'') during the period of Presidential
review. The RD recommends an LEO directed to gas spring nailer products
and components thereof that infringe the asserted claims of the '718
patent, and recommends a CDO directed against Hitachi. The RD does not
recommend imposing a bond.
On August 14, 2019, the Commission determined to review the ID in
part and remand in part. See Comm'n Notice (Aug. 14, 2019).
Specifically, the Commission determined to review the ID's finding that
Kyocera did not establish: (1) Either direct or induced infringement of
the asserted claims of the '718 patent, and (2) practice of the
asserted claims by the DI products to satisfy the DI requirement. The
Commission also determined to review the ID's finding that Kyocera has
satisfied the economic prong of the DI requirement. Id. The Commission
remanded the issues of whether Kyocera has established, by a
preponderance of the evidence, that: (1) The remaining limitations
(irrespective of the ``system controller'' limitation, i.e., ``a
circuit configured to control operation based on received input
signals'') of the asserted claims of the '718 patent are met by the
accused products; (2) the remaining limitations of the asserted claims
are practiced by the DI products (``the DI products''); and (3) Hitachi
induced infringement of the asserted claims. Id.
On October 28, 2019, the ALJ issued an RID finding no violation of
section 337 as to the '718 patent based on non-infringement and the
failure of Kyocera to establish the existence of a domestic industry
that practices the '718 patent. Specifically, the RID finds that: (1)
Neither the accused products nor the DI products satisfy the
``displacement volume'' limitation (i.e., ``(A) a hollow cylinder
comprising a cylindrical wall with a movable piston therewith, said
hollow cylinder containing a displacement volume created by a stroke of
said piston'') and the ``initiating a driving cycle'' limitation (i.e.,
``initiating a driving cycle by pressing said exit end against a
workpiece and actuating said trigger, thereby causing said fastener
driving mechanism to force the driver member to move toward said exit
end and drive a fastener into said workpiece'') of the asserted claims;
and (2) Kyocera failed to establish that Hitachi possesses the
requisite specific intent to induce infringement of the claims.
On November 12, 2019, Kyocera petitioned, and Hitachi contingently
petitioned, for review of the RID. On November 20, 2019, Kyocera and
Hitachi each filed a response in opposition to the other party's
petition for review.
On December 12, 2019, the Commission determined to review the RID
in part. Specifically, the Commission determined to review the RID's
finding that Kyocera did not establish: (1) Direct infringement of the
asserted claims with respect to the ``displacement volume'' and
``initiating a driving cycle'' limitations; (2) practice of the
asserted claims by the DI products with respect to these limitations;
and (3) induced infringement of the asserted claims. 84 FR 69391-92
(Dec. 18, 2019). The Commission determined not to review the remainder
of the RID. Id. The Commission also requested the parties to respond to
certain questions concerning the issues under review with respect to
the ID and RID, and requested written submissions on the issues of
remedy, the public interest, and bonding from the parties and
interested non-parties. Id.
On January 3 and 10, 2020, Kyocera and Hitachi each filed a brief
and a reply brief, respectively, on all issues for which the Commission
requested written submissions. Having reviewed the record in this
investigation, including the final ID, the RID, and the parties'
written submissions, the Commission has determined to find a violation
of section 337. Specifically, the Commission has determined that: (1)
The accused and DI products meet the ``system controller,''
``displacement volume,'' and ``initiating a driving cycle'' limitations
of the asserted claims 1, 10, and 16 of the '718 patent, and therefore
the accused products infringe these claims; (2) the DI products
practice these claims and therefore Kyocera has satisfied the technical
prong of the DI requirement; (3) Hitachi has induced infringement of
the asserted claims; and (4) Kyocera has
[[Page 14246]]
satisfied the economic prong of the DI requirement under section
337(a)(3)(C). The Commission reverses the ID's and RID's findings to
the contrary and takes no position on the ID's finding that Kyocera has
satisfied the economic prong of the DI requirement under section
337(a)(3)(B). Accordingly, the Commission finds a violation based on
Hitachi's induced infringement of the asserted claims. The Commission
has issued an opinion explaining the basis for the Commission's
determination.
Having found a violation of section 337 as to the '718 patent, the
Commission has determined that the appropriate form of relief is an LEO
prohibiting the entry of unlicensed gas spring nailer products and
components thereof that infringe one or more of claims 1, 10, and 16 of
the '718 patent, and that are manufactured abroad by or on behalf of,
or imported by or on behalf of Hitachi, or any of its affiliated
companies, parents, subsidiaries, or other related business entities,
or their successors or assigns. Appropriate relief also includes a CDO
prohibiting Hitachi from conducting any of the following activities in
the United States: Importing, selling, marketing, advertising,
distributing, offering for sale, transferring (except for exportation),
and soliciting U.S. agents or distributors for gas spring nailer
products and components thereof that infringe one or more of claims 1,
10, and 16 of the '718 patent.
The Commission has further determined that the public interest
factors enumerated in sections 337(d)(1) and 337(f)(1) (19 U.S.C.
1337(d)(1) and 1337(f)(1)) do not warrant denying relief. Finally, the
Commission has determined that no bond is required during the period of
Presidential review (19 U.S.C. 1337(j)). The Commission's order was
delivered to the President and to the United States Trade
Representative on the day of its issuance.
The Commission has terminated this investigation. The authority for
the Commission's determination is contained in section 337 of the
Tariff Act of 1930, as amended, 19 U.S.C. 1337, and in part 210 of the
Commission's Rules of Practice and Procedure, 19 CFR part 210.
By order of the Commission.
Issued: March 5, 2020.
William Bishop,
Supervisory Hearings and Information Officer.
[FR Doc. 2020-04925 Filed 3-10-20; 8:45 am]
BILLING CODE 7020-02-P