[Federal Register Volume 85, Number 122 (Wednesday, June 24, 2020)]
[Notices]
[Pages 37960-37961]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-13520]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2010-0038]
Rigging Equipment for Material Handling; Extension of the Office
of Management and Budget's (OMB) Approval of Information Collection
(Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning the proposal to
extend the OMB approval of the information collection requirements
contained in the Standard on Rigging Equipment for Material Handling.
The Standard requires affixing identification tags or markings on
rigging equipment, developing and maintaining inspection records, and
retaining proof-testing certificates.
DATES: Comments must be submitted (postmarked, sent, or received) by
August 24, 2020.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit a copy of your comments and
attachments to the OSHA Docket Office, OSHA Docket No. OSHA-2010-0038,
Occupational Safety and Health Administration, U.S. Department of
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210.
Deliveries (hand, express mail, messenger, and courier service) are
accepted during the Docket Office's normal business hours, 10:00 a.m.
to 3:00 p.m., ET.
Instructions: All submissions must include the agency name and OSHA
docket number (OSHA-2010-0038) for the Information Collection Request
(ICR). All comments, including any personal information you provide,
such as social security numbers and date of birth, are placed in the
public docket without change, and may be made available online at
http://www.regulations.gov. For further information on submitting
comments, see the ``Public Participation'' heading in the section of
this notice titled SUPPLEMENTARY INFORMATION.
Docket: To read or download comments or other material in the
docket, go to http://www.regulations.gov or the OSHA Docket Office at
the above address. All documents in the docket (including this Federal
Register notice) are listed in the http://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download from the website. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may also contact Theda Kenney at
the below address to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Seleda Perryman,
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor,
telephone (202) 693-2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of the continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accord with the Paperwork Reduction Act of
1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and OSHA's
estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act, or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also
requires OSHA to obtain such information with minimum burden upon
employers, especially those operating small businesses, and to reduce
to the maximum extent feasible unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
Paragraph (b)(1) of the Standard 29 CFR 1926.251 requires that
alloy steel chains have permanently affixed, durable identification
tags stating size, grade, rated capacity, and sling manufacturer.
Paragraph (b)(6)(i)
[[Page 37961]]
requires the employer to make a thorough periodic inspection of alloy
steel chain slings in use on a regular basis, but at least once a year.
Paragraph (b)(6)(ii) requires the employer to make and maintain a
record of the most recent month in which each alloy steel chain was
inspected and make the record available for examination.
Paragraph (c)(15)(ii) requires that all welded end attachments of
wire rope slings be proof tested by the manufacturer at twice their
rated capacity prior to initial use, and that the employer retain a
certificate of the proof test and make it available for examination.
Paragraphs (e)(1)(i), (ii), and (iii) require that synthetic web
slings be marked or coded to show the manufacturer's name or trademark,
the rated capacity for the type of hitch, and the type of synthetic
webbing material.
Paragraph (f)(2) requires that all hooks for which no applicable
manufacturer's recommendations are available be tested twice before
they are put into use. The employer shall maintain a record of the
dates and results of the tests.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must-comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
There is an adjustment decrease of 3,269 burden hours (from 52,428
hours to 49,159 hours). This decrease is a result of new data
indicating a decrease in the number of cranes and derricks from 122,091
to 115,829.
Type of Review: Extension of a currently approved collection.
Title: Rigging Equipment for Material Handling (29 CFR 1926.251).
OMB Control Number: 1218-0233.
Affected Public: Business or other for-profits.
Number of Respondents: 115,829.
Total Responses: 306,729.
Frequency of Responses: On occasion.
Average Time per Response: Average of 3 minutes (3/60 hour) for an
employer to maintain and disclose a certificate to 30 minutes (30/60
hour) for an employer to acquire information and make a tag for a
sling.
Estimated Total Burden Hours: 49,159.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other material must identify the agency name
and the OSHA docket number for the ICR (OSHA Docket No. 2010-0038). You
may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify your electronic comments
by your name, date, and the docket number so the agency can attach them
to your comments.
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information, such as social security numbers and
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted
material) is not publicly available to read or download through this
website. All submissions, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the http://www.regulations.gov website to submit comments and
access the docket is available at the website's ``User Tips'' link.
Contact the OSHA Docket Office for information about materials not
available through the website, and for assistance in using the internet
to locate docket submissions.
V. Authority and Signature
Loren Sweatt, Principal Deputy Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012
(77 FR 3912).
Signed at Washington, DC, on June 18, 2020.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety
and Health.
[FR Doc. 2020-13520 Filed 6-23-20; 8:45 am]
BILLING CODE 4510-26-P